Stratux Remote Radio and GPS Antennas Mount

Description

3D printed PETG remote head for mounting Stratux antennas on the window only instead of the whole Stratux unit. The head is mounted using 2 suction cups and the main unit can be placed at more convenient and/or cooler place for safer operations (I just hate to have Stratux box hanging on the window and constantly watching it if it is not moving or falling down).
Included are 2  printed PETG cable clips with suction cups to route the antenna cables and to ease the strain caused by the cables weight on the head.
Option 1: Remote head - 1ea PETG remote housing, 2ea 30mm suction cups
Option 2: Remote head w/radio cables -   Option 1 + 2ea antenna cables with connectors (6-7ft long each), 2ea PETG antenna connector covers, 2ea PETG cable clips, 2ea 20mm suction cups,
Option 3: Remote head w/radio cables & USB GPS - Option 2 + USB VK162 external GPS antenna
Option 4: Remote head w/radio cables & SMA GPS - Option 2 + SMA external GPS antenna
The units are shipped fully assembled and ready to use right away.