SmartAmp Bi-Directional 900 MHz 1 Watt Amplifier

Description

Manufacturer Part Number: 12-101
Designed for extending the range of 900 MHz wireless radio devices, Teletronics SmartAmp is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems. Built-in dynamic power sensor adjusts the RF power output level by reading the input signal power. Delivers maximum output power at various input levels while keeping the distortion at a minimum.Full output power of 1W is achieved with only 4mW input to the amplifier. Above 4mW input, the SmartAmp attenuates the input signal power and maintains the output power typically at 1W.Substantial discounts available for OEMs and large volume purchases.
Key Features
Dynamic power sensor adjustments
Delivers maximum output power at various input levels with minimum distortion
Patent Automatic Gain Control (AGC) makes the RF amplifiers "Plug & Play"
Also available in 2.4 & 5.8GHz versions
Key Parameters
Amplifier Category
900 MHz Amplifiers
Operating Mode
Bidirectional, TDD
Electrical Specification
Frequency Bands
900 MHz (ISM)
Frequency
902 - 928 MHz
Min Transmit Input Power
0 dBm
Max Transmit Input Power
23 dBm
Max Transmit Output Power
1 Watts
Transmit Gain
24 dB
Receive Gain
16 dB
Frequency Response
+/-1 dB
Noise Figure
3.5 dB
Lightning Protection
Quarter Wave Technology
Voltage Input (DC)
9 VDC
Current Input
1.2 A
Mechanical Specification
Input Connector
N-Female
Output Connector
N-Female
Dimensions (Inches)
4.25 x 3.25 x 1.75
Weight
5 lb
Operating Temperature
-40 degF to 158 degF
Regulatory & Compliance
Compliance
FCC